neo bedroom3.jpg
wave website 2.png
Wireless Controls

HydroHeat also offers our wireless option. All of our wireless thermostats work with our UH8-RF 8 zone wiring centre or our single zone RF Switch wireless receivers.

UH8-RF Wiring Centre

The Heatmiser UH8-RF is designed to be used in conjunction with our wireless thermostats. The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. Eight zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to 6 actuators can be connected to each zone. A software option in our wireless thermostats allows you to configure which zones are underfloor heating and which are radiators. The RF Switch can be paired to the UH8-RF in order to offer a wireless boiler link.


The Heatmiser Slimline-RF is our multi mode wireless thermostat that is compatible with our UH8-RF and RF Switch Wireless Receivers. The Slimline-RF can be used with a remote sensor, so measuring the temperature up to 20 meters from the thermostat is possible.

The Slimline-RF can be operated in heating or heating & hot water mode


The Heatmiser RF Switch is a 2 channel receiver. It can cater for a single heating zone and the hot water cylinder as well as providing a boiler enable output. Output indications are provided and the unit is surface mount for easy installation.

In addition, the RF Switch can act as a wireless boiler enable link from the UH8-RF 8 Zone Wiring Wiring Centre.


The Heatmiser Boost is our surface mount repeater for the RF and Neo System.  The Heatmiser Boost is designed to extend the communication between the RF Thermostats and Wiring Centre and the neoStat/neoAir & neoHub.

brochure download button-1.jpg