Heatmiser Neo has been designed to offer multi-zone smart control for most heating systems, including radiators, electric and water underfloor heating.
Google Home support adds great connectivity to an already feature rich solution.
Google Home speakers enable users to speak voice commands to interact with services through Google’s intelligent personal assistant called Google Assistant.
HomeKit support adds great connectivity to an already feature rich solution.
UH8 Wiring Centre
The UH8 is our 8 zone mains powered wiring centre designed for use with the neoStat Thermostat.
Up to 6 actuators can be wired to each of the 8 zones and an output is provided for the boiler, underfloor heating pump and valve.
Zone 8 of the UH8 can be setup to control a radiator zone, in this case not enabling the UFH Pump and Valve.
UH8-RF Wiring Centre
The UH8-RF is our wireless wiring centre designed for use with the neoAir Thermostat.
Up to 6 actuators can be wired to each of the 8 zones and an output is provided for the boiler, underfloor heating pump and valve. Additionally, the boiler signal can be sent wirelessly to the RF Switch.
A Software option in the thermostat allows you to configure which zones are underfloor heating and which are radiators. Radiator zones will not enable the UFH Pump and Valve.
The neoStat’s have been designed to be slim & stylish, with three stunning colours available. neoStat’s are just a little bigger than a standard light switch, so you will notice what it does rather than where it is. The neoStat’s can be controlled from anywhere thanks to the plug and play neoHub. Neo has been designed to offer multi-zone smart control for most heating systems, including radiators, electric and water underfloor heating. HomeKit support adds great connectivity to an already feature rich solution.
The Heatmiser neoUltra has been designed to work as a standalone thermostat or as part of an app-controlled Neo System. In addition, the neoUltra can operate as a central controller, providing a single point of access to all of the neoStat, neoAir & neoPlug in the home.
neoHub Gen 2 System Hub
The neoHub Gen 2 handles all of the network communication between the neoStat, neoAir and neoPlug and is very much the brain of the Neo System. Therefore you will require one if you’re looking to control your heating & hot water system from your smartphone.
The neoHub Gen 2 connects to your home router by an ethernet cable, so one free port is required. The neoHub Gen 2 very much plugs and play and pairing neoStat’s, neoAir & neoPlug to the neoHub Gen 2 couldn’t be easier. After you have paired all of your Neo devices (up to 32 are supported) you will have In-Home and Remote access to your heating, hot water and appliances.
To ensure your neoHub Gen 2 is always up to date, your neoHub will automatically download and install updates so you will always benefit from the very latest software enhancements.
Expand your Neo System with neoPlug and control your Appliances from Anywhere! With the Heatmiser neoPlug you can control the appliance manually from the neoApp or you can program switching times via the app that the appliance will follow.
With our latest apps for Android, Windows 10 and iOS, users can include the neoPlug in their Geo Location triggers, so the appliance can turn on when you get close to home or when you leave.